Your Trusted Force Gauge Calibration Provider
Micro Precision is an ISO/IEC 17025:2017 accredited calibration provider with NIST-traceable reference standards and a network of more than 50 laboratories operating worldwide. Force gauges measure tension and compression force at the point of application, and even small measurement drift undermines the safety and quality decisions built on those readings.
Micro Precision provides ISO/IEC 17025:2017 accredited force gauge calibration with NIST-traceable standards, supporting aerospace, defense, medical device manufacturing, automotive, and general manufacturing industries. Our global network of more than 50 laboratories delivers consistent, documented calibration results accepted by quality auditors and regulatory bodies across regulated industries worldwide.
Force gauge calibration is part of Micro Precision’s broader mechanical and dimensional calibration services, offered as a distinct service from load cell calibration services for force transducers integrated into test systems and presses.
Why Force Gauge Calibration Matters
Force gauge calibration matters because tension and compression measurement accuracy directly affects product testing integrity, safety decisions, and regulatory compliance. A force gauge that drifts out of tolerance produces readings that appear valid but mask real measurement error, misleading pass/fail testing decisions and quality results.
Regulatory frameworks reinforce this requirement directly. ANSI/NCSL Z540.3 requires documented, objective evidence of calibration for measuring and test equipment used in regulated processes, and most internal quality systems and customer audits expect the same standard of traceable, uninterrupted calibration history. For quality managers and compliance officers, a valid calibration certificate with clear traceability is not optional.
Procurement officers rely on accredited calibration vendors to reduce sourcing risk and simplify audit preparation, while lab technicians depend on accurate force readings to trust their test results. Micro Precision supports both priorities with standard and faster turnaround options and both in-lab and on-site calibration service, backed by ISO/IEC 17025:2017 accreditation.
Ensure Accurate Force Gauge Calibration
Accurate force gauge calibration requires a structured process that verifies tension and compression readings against known references and corrects any deviation found. Micro Precision follows a documented calibration workflow for every force gauge received, performed under the controls required by our ISO/IEC 17025:2017 accreditation.
The process for each instrument includes:
- Receipt and inspection: instrument condition, force capacity, and fixture configuration are verified on arrival
- Performance testing: the gauge’s tension and compression readings are tested against laboratory reference standards traceable to NIST across defined test points to establish as-found status
- Adjustment: systematic measurement errors are corrected using calibration methods appropriate to the instrument’s type and force capacity
- Post-adjustment verification: measurements confirm the instrument performs within required parameters after calibration
- Documentation: a certificate of calibration is issued, documenting the calibration date, interval, standards used, and as-found and as-left data
- Return: the calibrated force gauge is packaged and returned with its certificate of calibration
Standard and faster turnaround options are available for time-critical programs. Contact our team to discuss current lead times and priority scheduling.
Our Calibration Options
Micro Precision offers both in-lab and on-site force gauge calibration to match your equipment configuration, testing environment, and program timeline. Choosing between the two options depends primarily on whether the gauge is a portable handheld unit or integrated into a fixed test setup.
In-Lab Calibration
Ship your force gauge to one of our accredited laboratories for full-capability calibration under controlled conditions. In-lab service supports the complete range of calibration documentation options, including ISO/IEC 17025:2017 accredited certificates with NIST-traceable measurement results.
On-Site Calibration
For force gauges integrated into production testing or quality control workflows that cannot be removed from service, Micro Precision sends qualified calibration technicians directly to your facility. On-site calibration reduces downtime, eliminates shipping risk, and keeps testing operations running while delivering the same documentation options available for in-lab service.
Faster Turnaround
Standard and faster turnaround options are available for both in-lab and on-site service. Contact our team to discuss current lead times and priority scheduling.
Force Gauge Types We Calibrate
Micro Precision calibrates a variety of force gauge types and instruments from the manufacturers used across product testing, quality control, and materials testing environments.
- Digital push-pull force gauges used for tension and compression testing
- Mechanical (dial) force gauges for analog force reading applications
- Tension force gauges for pull-testing applications
- Compression force gauges for push-testing applications
- Crane scales and hanging force gauges
- Mark-10 digital force gauges
- Chatillon (AMETEK) force gauges
- Imada and Wagner force gauges
If your force gauge model is not listed here, contact our team to confirm support. Force gauge calibration is offered as a distinct service from load cell calibration for force transducers integrated into test systems and presses.
Calibration Service Levels Offered
Micro Precision offers service levels to match your quality program requirements, from NIST-traceable certificates to fully accredited calibration documentation with measurement uncertainty statements.
| Type of Service | Traceable | Traceable with Data | Accredited (ISO:IEC 17025:2017, Z540.3) |
|---|---|---|---|
| Calibrated to manufacturers specifications traceable to SI Units | |||
| ISO 9000 Compliant | |||
| Calibration certificates, data, maintained on secure web based tool (CDM) | |||
| Detailed calibration certificates and calibration stickers | |||
| Instrument adjustment (if found out of tolerance) | |||
| ANSI/NCSL Z540-1 compliant | |||
| Calibration Data | |||
| Logo from Accreditation body, Expanded Measurement Uncertainty | |||
| ANSI/NCSL Z540.3 compliant |
Force Gauge Calibration Services
Micro Precision delivers ISO/IEC 17025:2017 accredited force gauge calibration with NIST traceability, documented certificates, and on-site service options for production and quality testing environments. With more than 50 laboratories serving aerospace, defense, medical, automotive, and manufacturing industries, Micro Precision provides the accredited calibration record your quality program requires. Submit a request today to discuss your force gauge inventory, service level requirements, and turnaround options.
Please complete our quick Force Gauge calibration & repair service request form, and a Micro Precision representative will reach out to you same-day during office hours, or within one business day after office hours. (Mon – Friday 8AM – 4PM PST)
Force Gauge Service
If you have any inquiries, or simply wish to connect with us, we'd love to hear from you! Please don't hesitate to reach out to us.
"*" indicates required fields
Frequently Asked Questions
Force gauge calibration is the process of verifying and adjusting a force gauge’s tension and compression readings against NIST-traceable reference standards. It matters because undetected drift produces force readings that appear valid but mask real measurement error, leading to faulty pass/fail decisions and non-conformance findings during ISO/IEC 17025:2017 quality audits.
Micro Precision recommends an annual calibration interval for most force gauges, consistent with common quality program requirements and ANSI/NCSL Z540.3 guidance for measuring and test equipment. Force gauges used in high-cycle or higher-precision testing applications may warrant a shorter interval based on usage and risk.
Force gauge calibration applies known force loads to the instrument at defined points across its measurement range and compares the displayed reading against NIST-traceable reference standards, then corrects any deviation found. Technicians document as-found and as-left data before issuing a certificate of calibration confirming NIST traceability and accredited compliance.
Force gauge calibration cost depends on the instrument type, force capacity, and service level selected. Micro Precision does not publish flat-rate pricing because scope varies by make and model. Contact our team for a calibration quote specific to your force gauge inventory.
A force gauge is a standalone handheld or benchtop instrument that measures tension or compression force directly at the point of application, while a load cell is a force transducer typically integrated into a test system, scale, or press. Micro Precision calibrates both instrument categories under distinct accredited scopes.
Force gauge calibration is commonly performed against ASTM E4 and ISO 7500-1 for force verification, alongside ANSI/NCSL Z540.3 general calibration requirements. Micro Precision performs this calibration under ISO/IEC 17025:2017 accreditation, using NIST-traceable reference standards to verify tension and compression accuracy across the instrument’s measurement range.
Yes. Micro Precision provides on-site force gauge calibration for instruments used in production testing or quality control environments where shipping is impractical. Qualified technicians travel to your facility with NIST-traceable reference standards and complete the same documented calibration process used in our accredited laboratories, including certificate issuance.