Your Trusted Height Gage Calibration Provider
Micro Precision is an ISO/IEC 17025:2017 accredited calibration provider delivering NIST-traceable height gage calibration services through a network of more than 50 labs. Quality managers, metrologists, and procurement teams across aerospace, defense, medical device, automotive, and manufacturing industries rely on Micro Precision to keep digital, dial, vernier, and electronic height gages within their required verification standards. The instrument is also commonly called a height gauge, and Micro Precision’s calibration program covers both spellings and every configuration in use across a quality lab or machine shop floor. Micro Precision’s technicians test each height gage against certified reference standards across its full travel range, applying a documented, repeatable verification process to every submission. Micro Precision’s calibration network gives procurement officers a single certified vendor for an entire fleet of height gages and other dimensional instruments, rather than a patchwork of regional providers. Explore our manufacturer calibration services for additional brand-specific support.
Micro Precision’s ISO/IEC 17025:2017 accreditation and NIST-traceable measurement chain give quality managers a documented, audit-ready calibration record for every digital, dial, vernier, or electronic height gage submitted, supporting compliance across aerospace, defense, medical, automotive, and manufacturing quality systems.
Why Height Gage Calibration Matters
Height gage calibration matters because an uncalibrated instrument introduces dimensional measurement error that can pass defective parts, trigger quality failures, and create non-conformance findings during an audit. ANSI/NCSL Z540.3 establishes the calibration program requirements that quality systems depend on to keep dimensional measuring equipment within its required accuracy. Without a documented, accredited calibration program, a height gage reading cannot be trusted to represent the actual dimension being measured, whether that height gage is verifying a machined part, a fixture, or an assembly tolerance.
Quality managers need a documented, traceable calibration history to pass ISO/IEC 17025:2017 and customer audits without corrective action findings. Procurement officers need a certified vendor whose calibration certificates hold up under scrutiny from aerospace, defense, medical device, automotive, and manufacturing customers. Lab technicians and metrologists need confidence that a height gage’s scriber and column readings reflect true measurements, not drift accumulated through daily shop floor use. Micro Precision’s calibration program addresses each of these concerns directly, applying ANSI/NCSL Z540.3 program discipline to every digital, dial, vernier, and electronic height gage it services.
Ensure Accurate Height Gage Calibration
Ensuring accurate height gage calibration means verifying the instrument’s scriber, column, and digital or dial readout against certified gage blocks and reference standards across its full measuring range, then documenting the results on a certificate of calibration. Micro Precision follows a defined sequence for every height gage received: receive and inspect the instrument, verify the base and column for wear or damage, test the instrument against certified gage blocks at multiple points across its travel range, measure and record as-found and as-left results, adjust the instrument where needed, and issue documentation confirming the outcome. Every height gage returns with a certificate of calibration documenting the verification performed and the standards referenced. Micro Precision offers standard turnaround alongside faster turnaround options for height gages on a tight production or audit schedule, without compromising the verification steps required to maintain accredited calibration.
Micro Precision calibrates height gages by inspecting the instrument, testing it against NIST-traceable certified gage blocks and reference standards at multiple points across its full travel range, recording as-found and as-left results, making adjustments where required, and issuing a certificate of calibration for every instrument.
Our Calibration Options
Micro Precision offers height gage calibration through both in-lab and on-site service, giving quality managers and procurement officers a choice based on equipment size, production schedule, and downtime tolerance. In-lab calibration ships the instrument to one of Micro Precision’s ISO/IEC 17025:2017 accredited labs for full calibration under controlled environmental conditions. On-site calibration brings a Micro Precision technician directly to the facility.
On-site service is especially valuable for facilities managing a variety of height gages across multiple production lines or quality labs, where shipping every instrument would create unacceptable downtime. Bringing calibration to the equipment keeps height gages in service longer between visits and reduces the administrative burden of coordinating shipments for an entire dimensional measurement fleet.
Both in-lab and on-site height gage calibration are backed by NIST traceability and documented on a certificate of calibration referencing applicable industry standards. Micro Precision provides standard turnaround for both service types, with faster turnaround options available for time-sensitive audit or production needs across its network of more than 50 calibration labs.
Height Gage Types We Calibrate
Micro Precision calibrates a variety of height gage types and configurations, supporting digital, dial, vernier, and column-style instruments from leading manufacturers used across quality labs and machine shops.
- Digital height gages, including Mitutoyo Digimatic height gage models
- Dial height gages
- Vernier height gages
- Electronic height gages (also referred to as height gauges
- Column-type height gages
- Fowler height gages
- Starrett height gages
- Mahr digital height gages
Height gage models not listed here are likely supported as well. Contact Micro Precision to confirm calibration availability for a specific make and model. Height gage calibration is available as part of Micro Precision’s broader Mitutoyo calibration services and Mechanical & Dimensional Calibration capabilities.
Calibration Service Levels Offered
Micro Precision offers height gage calibration at multiple service levels, from basic traceable certification to fully accredited documentation, so quality programs can match the rigor their industry requires.
| Type of Service | Traceable | Traceable with Data | Accredited (ISO:IEC 17025:2017, Z540.3) |
|---|---|---|---|
| Calibrated to manufacturers specifications traceable to SI Units | |||
| ISO 9000 Compliant | |||
| Calibration certificates, data, maintained on secure web based tool (CDM) | |||
| Detailed calibration certificates and calibration stickers | |||
| Instrument adjustment (if found out of tolerance) | |||
| ANSI/NCSL Z540-1 compliant | |||
| Calibration Data | |||
| Logo from Accreditation body, Expanded Measurement Uncertainty | |||
| ANSI/NCSL Z540.3 compliant |
Height Gage Calibration Services
Micro Precision delivers ISO/IEC 17025:2017 accredited, NIST-traceable height gage calibration services for digital, dial, vernier, and electronic height gages (height gauges) from manufacturers including Mitutoyo, Fowler, Starrett, and Mahr, backed by a network of more than 50 calibration labs. Quality managers get audit-ready documentation. Procurement officers get a single certified vendor for an entire dimensional measurement fleet. Lab technicians get calibration results they can trust. Request a calibration quote today and put a definitive standard behind your height gage calibration program.
Please complete our quick Height Gage calibration & repair service request form, and a Micro Precision representative will reach out to you same-day during office hours, or within one business day after office hours. (Mon – Friday 8AM – 4PM PST)
Height Gage Service
If you have any inquiries, or simply wish to connect with us, we'd love to hear from you! Please don't hesitate to reach out to us.
"*" indicates required fields
Frequently Asked Questions
Height gages are commonly calibrated on an interval of six to twelve months, adjusted for usage frequency, operating environment, and the quality system’s internal requirements. High-volume production height gages and instruments supporting aerospace, defense, or medical device quality programs often warrant more frequent verification between full calibrations.
Calibrating a height gage involves inspecting the instrument, testing it against NIST-traceable certified gage blocks and reference standards at multiple points across its full travel range, recording as-found and as-left results, making adjustments where needed, and issuing a certificate of calibration. Micro Precision performs this process for digital, dial, vernier, and electronic height gages.
Height gage and height gauge refer to the same precision dimensional measuring instrument. Gage is the traditional spelling used within the precision measurement and machining community, while gauge is the general-English spelling. Manufacturers such as Mitutoyo use gage in their own product naming, and Micro Precision calibrates the instrument under either spelling.
Micro Precision calibrates height gages under its ISO/IEC 17025:2017 laboratory accreditation, applying ANSI/NCSL Z540.3 calibration program requirements across digital, dial, vernier, and electronic height gages. Every calibration is backed by NIST traceability and documented on a certificate of calibration referencing the accreditation and program standards applied.
NIST traceability means a height gage’s calibration results are linked through an unbroken chain of comparisons to national measurement standards maintained by the National Institute of Standards and Technology. This traceability gives quality managers and auditors confidence that a height gage’s readings are accurate and defensible under ISO/IEC 17025:2017 and customer quality system reviews.
Micro Precision calibrates height gages on-site as an alternative to shipping the instrument to a lab, sending a technician directly to the facility. On-site service is especially useful for facilities managing a variety of height gages across multiple production lines, and it is available across Micro Precision’s network of more than 50 calibration labs nationally.
A height gage calibration certificate documents the instrument identification, the date of calibration, the reference standards and gage blocks used, the as-found and as-left measurement results, and the accreditation and standards referenced, including ISO/IEC 17025:2017 and NIST traceability. Micro Precision issues this certificate for every height gage calibrated.