Your Trusted Leak Tester Calibration Provider
Micro Precision is a trusted leak tester calibration provider because our laboratories hold ISO/IEC 17025:2017 accreditation and maintain unbroken NIST traceability across a global network of 50+ calibration laboratories. Quality managers, test engineers, and procurement officers rely on this accreditation structure to satisfy internal quality systems, customer audits, and defense or aerospace contract requirements for calibrated test equipment.
Micro Precision serves aerospace, defense, medical device, automotive, and manufacturing industries that depend on accurate pressure decay, vacuum decay, and bubble emission leak testing during seal integrity verification and production quality control.
Micro Precision provides NIST-traceable, ISO/IEC 17025:2017 accredited leak tester calibration through a global network of 50+ calibration laboratories, serving aerospace, defense, medical device, automotive, and manufacturing industries with a documented certificate of calibration issued for every pressure decay, vacuum decay, and bubble leak test system processed.
Leak testers are frequently calibrated alongside the pressure calibrators, pressure transducers, and vacuum gauges used to verify the same test setup. Micro Precision’s pressure calibrator calibration, pressure transducer calibration, and vacuum gauge calibration services apply the same ISO/IEC 17025:2017 accreditation and NIST traceability, as part of our broader mechanical and dimensional calibration services portfolio, giving quality teams a single accredited provider for an entire leak test setup.
Why Leak Tester Calibration Matters
Leak tester calibration matters because inaccurate pressure decay, vacuum decay, or bubble emission readings undermine the validity of every seal-integrity test performed against that instrument, creating downstream product quality and compliance risk. An uncalibrated leak tester can allow a defective seal to pass testing or a compliant seal to fail unnecessarily, increasing the risk of field failures, warranty claims, and product recalls. Calibration performed to ANSI/NCSL Z540.3 requirements confirms that a leak tester’s measurement functions remain within its intended operating range and produce data that quality systems and customers can trust.
Uncalibrated leak testers risk product recalls and regulatory noncompliance because pressure decay, vacuum decay, and bubble emission readings that drift out of specification can allow defective seals to pass inspection, a risk that ANSI/NCSL Z540.3 calibration requirements and ISO/IEC 17025:2017 accredited testing are designed to prevent.
Quality managers depend on calibration records and audit trails to demonstrate compliance during ISO certification reviews, since gaps in leak tester calibration history create nonconformances that delay audits. Procurement officers select calibration vendors that maintain ISO/IEC 17025:2017 accreditation and NIST traceability, reducing the risk of noncompliant test data reaching a customer or regulator.
Ensure Accurate Leak Tester Calibration
Ensuring accurate leak tester calibration means verifying pressure decay, vacuum decay, or flow measurement readings against certified reference standards across the instrument’s full operating range, then adjusting and documenting any deviation before the leak tester returns to service. Micro Precision follows the same disciplined process for every pressure decay, vacuum decay, and bubble leak test system submitted, regardless of manufacturer or model.
Micro Precision calibrates a leak tester by receiving and inspecting the instrument, connecting a certified reference leak or calibration standard, comparing readings against NIST-traceable references across the tester’s full operating range, recording any deviation, adjusting the instrument, and verifying performance before issuing a certificate of calibration.
Every calibrated leak tester ships with a certificate of calibration documenting as-found and as-left results. Micro Precision offers standard and faster turnaround options so instruments return to service on the schedule quality teams require. The instrument then returns ready for immediate use in seal-integrity and production leak test applications.
Our Calibration Options
Micro Precision offers leak tester calibration through both in-lab and on-site service options, giving test engineers and quality teams flexibility to choose the method that fits their production and test schedule. Both options deliver the same ISO/IEC 17025:2017 accredited, NIST-traceable calibration and certificate of calibration documentation for every pressure decay, vacuum decay, and bubble leak test system.
In-lab calibration routes a leak tester to one of Micro Precision’s accredited calibration laboratories, where technicians calibrate the instrument in a controlled environment with a full range of certified reference leaks and calibration standards on hand. On-site calibration brings qualified technicians and calibration equipment directly to a facility, minimizing downtime for organizations that cannot remove a leak tester from an active production line or test bench.
Both service paths include standard turnaround for routine scheduling and faster turnaround for time-sensitive calibration needs. Quality managers and procurement officers can select whichever option best supports their audit timelines, while test engineers benefit from minimal disruption to ongoing seal-integrity and production leak testing.
Leak Tester Types We Calibrate
Micro Precision calibrates a variety of leak tester types used in seal-integrity and production quality verification across aerospace, medical device, automotive, and manufacturing test environments.
- Pressure decay leak testers
- Vacuum decay leak testers
- Bubble leak test systems (bubble emission testers)
- Differential pressure decay leak testers
- Mass flow leak testers
- Multi-channel and multi-station leak test systems
- Seal integrity test systems
- Production-line leak test benches
Micro Precision calibrates leak testers from a variety of manufacturers, including ATEQ, Uson, Cincinnati Test Systems, and InTest, across pressure decay, vacuum decay, and bubble emission configurations.
Leak testers are commonly calibrated alongside the pressure calibrators, pressure transducers, and vacuum gauges used in the same test setup. See Micro Precision’s pressure calibrator calibration services, pressure transducer calibration services, and vacuum gauge calibration services for related instrument coverage.
Models not listed above are likely supported. Contact Micro Precision to confirm calibration availability for a specific leak tester make or model.
Calibration Service Levels Offered
Micro Precision offers three tiers of leak tester calibration service, allowing quality teams to select the documentation level that matches their compliance and audit requirements.
| Type of Service | Traceable | Traceable with Data | Accredited (ISO:IEC 17025:2017, Z540.3) |
|---|---|---|---|
| Calibrated to manufacturers specifications traceable to SI Units | |||
| ISO 9000 Compliant | |||
| Calibration certificates, data, maintained on secure web based tool (CDM) | |||
| Detailed calibration certificates and calibration stickers | |||
| Instrument adjustment (if found out of tolerance) | |||
| ANSI/NCSL Z540-1 compliant | |||
| Calibration Data | |||
| Logo from Accreditation body, Expanded Measurement Uncertainty | |||
| ANSI/NCSL Z540.3 compliant |
Leak Tester Calibration Services
Micro Precision combines ISO/IEC 17025:2017 accreditation, NIST traceability, and explicit support for ATEQ, Uson, Cincinnati Test Systems, and InTest leak testers with a genuine, schema-backed FAQ, a combination few leak tester calibration providers offer in one place. Every pressure decay, vacuum decay, and bubble leak test system returns with a certificate of calibration from a network of 50+ accredited laboratories serving aerospace, defense, medical device, automotive, and manufacturing industries. Request a calibration quote to schedule leak tester calibration services today.
Please complete our quick Leak Tester calibration & repair service request form, and a Micro Precision representative will reach out to you same-day during office hours, or within one business day after office hours. (Mon – Friday 8AM – 4PM PST)
Leak Tester Services
If you have any inquiries, or simply wish to connect with us, we'd love to hear from you! Please don't hesitate to reach out to us.
"*" indicates required fields
Frequently Asked Questions
A leak tester should be calibrated on a regular interval determined by manufacturer recommendations, usage frequency, and the criticality of the test data it supports. Annual calibration is a common interval for pressure decay, vacuum decay, and bubble leak test systems, though organizations operating under ANSI/NCSL Z540.3 should adjust frequency based on documented usage and risk.
A leak tester is calibrated by connecting a certified reference leak or calibration standard, verifying the instrument’s pressure decay, vacuum decay, or flow measurement readings against that known reference, and recording any deviation. Technicians then adjust the leak tester to bring readings within specification and verify performance before issuing a certificate of calibration documenting the results.
A calibration leak, also called a test leak or reference leak, is a certified device that produces a known, repeatable leak rate traceable to national standards. Technicians use a calibration leak to verify that a leak tester detects and measures leak rates accurately across its operating range, providing the NIST-traceable reference point required for a valid calibration.
ISO/IEC 17025:2017 requires that leak tester calibration be performed using documented procedures, calibrated reference standards with NIST traceability, and trained personnel operating under a managed quality system. Micro Precision’s ISO/IEC 17025:2017 accredited laboratories meet these requirements for every pressure decay, vacuum decay, and bubble leak test system calibrated, issuing a certificate of calibration for each instrument.
Leak tester calibration cost varies by equipment type, service level, and turnaround option selected, since a single-channel pressure decay unit and a multi-station production leak test system require different reference standards and test time. Micro Precision provides a specific calibration quote after reviewing an instrument’s make, model, and required service tier rather than publishing a fixed price.
A leak tester calibration certificate should include the instrument’s make, model, and serial number, the calibration date and due date, the reference standards used with their NIST traceability, and the as-found and as-left measurement results. Micro Precision issues a certificate of calibration documenting this information for every leak tester calibrated in its ISO/IEC 17025:2017 accredited laboratories.
Calibrating a leak tester compares its readings against NIST-traceable reference standards across its full operating range and adjusts the instrument when results fall outside specification, then documents the results on a certificate of calibration. Verifying a leak tester checks performance at a single point without adjustment, confirming the instrument still performs to specification between full calibrations.